• Color: Black; Material: Rubber; Inner Diameter: 11mm / 0.43 inch; Total Size: 36 x 29mm / 1.4 x 1.1 inch(OD*H); Package List: 4 x Feet Pads
• Advantage: Rubber isolator mounts are not easy to deform and corrosion has good elastic properties and long service life. This absorber shock is stable and convenient to position and can be well-supported during use. Feet mount can avoid directly contact between the machine and the ground to produce marks, reduce the machine's vibration and noise during operation, and has good vibration isolation performance.
• Instruction: The installation is simple, and the corners of the machine can be directly inserted into the foot pad.
• Application: This foot pad is mainly used in household or outdoor air conditioners, refrigerators, generators, and compressors, supporting and achieving the effect of anti-vibration and noise reduction during the use of the machine. Feet mount can also be used in computer desk mats, sofa cushions, cabinets, etc.
• Note: Pay attention to the inner diameter of the feet pad according to your need before ordering.

About this item

• Specification: Material: Brass; Color: Brass Tone; Copper Tube Size: 88 x 17mm/ 3.5 x 0.67inch (LxDia); Opposite Fixed Rod Length: 50mm/ 2inch; Application Range: Suitable for 12.7mm(1/2inch) OD Copper Pipe; Package List: 1 x Pipe Valve Fittings
• This stop Valve is widely used in air conditioner and other HVAC system, it plays the role of connecting the outdoor unit and the indoor unit for split air conditioner. Also, it functions in closing or opening the refrigerant circuit, vacuum or fill the refrigerant, it's an essential item for air conditioner maintenance and repair.
• Advantage: Our valve fittings are made of quality brass, anti-corrosion, hard, and high-pressure, and are sturdy for durable use. Provided with flare nut, allows you to connect copper pipes easily.
• Instruction: The valve fittings can be applied in plumbing hardware, air conditioning and refrigeration, hot and cold water supply equipment, air energy water heaters, refrigeration equipment, etc.
• NOTE: Please check the size before purchasing.

About this item

• Specification: Size: 29 x 68 x 40 mm/1.1 x 2.7 x 1.6 inch(H*OD*ID); Fit Hole Diameter: 40 mm -49 mm/1.6 Inch -1.9 Inch; Material: Polypropylene; Finish: Polishing; Packing List: 2 Pcs x Round Vent Cover
• Advantage: The air conditioning wall hole cover is made of polypropylene which is thick, durable, corrosion resistant, wear resistant, easy to clean, and can be used for a long time; Buckle design strengthens the installation, preventing the cover from falling off; The middle cover is designed to be easily removable. You can open the cover when you need to install a pipe, and you can use the cover to block it when you don't need to install a pipe.
• Application: The air conditioning wall hole cover is widely used in bedrooms, bathrooms, kitchens, living rooms, offices, and warehouses. They can be used for the decoration or covering of heating pipes, water pipes, drain pipes, or covering of round holes.
• Instruction: The middle cover can be easily removed when you need to install a pipe. Just push the middle of the cover outwards with your hand; To achieve better covering and sealing effects, please use some sealant clay around the connection.
• Note: Please confirm the diameter of the hole and choose the appropriate size before purchasing.

About this item

• Specification: Material: Copper; Color: Copper Color; Size: 19.5 x 13.1 x 3.1mm / 0.77 x 0.52 x 0.12inch (Outer Dia x Inner Dia x H); Application: Suitable for 5/8" Tube OD Size; Package List: 10Pcs x Copper Flare Gasket
• The copper flare gasket is used for sealing 45 degree flare pipe fitting. Widely used in air conditioner, refrigeration machine, gas and hydraulic applications.
• Advantage: Our flare gasket is made of quality copper, wear-resistant, hard, and not easily deformed for durable use. Good ductility and corrosion resistance. The surface is smooth and without burrs, good for metal-to-metal seal.
• Instruction: The flare gasket can be used with brass, aluminum, chopper, welded steel hydraulic tubing that can be flared, such as flared copper pipes, flare nuts, flare plugs, flare adapters etc.
• NOTE: Please check the size before purchasing.