TOP CATEGORIES

(1 Pack) Lidertik 1/2 inch CPVC Connect Pre-Assembled Ice Maker Outlet Box Valve 1/4 inch Recessed Refrigerator Water Line Wall Box with Shut Off Valve LI-ZBQH-540

Price range: $25.20 through $31.20

About this item

  • Easy-to-install the ice maker outlet box, designed specifically for ice maker.
  • Inlet:1/2 inch CPVC connect.
  • Outlet:1/4 inch compression connect with ice maker hose.
  • Rest assured, our product meets stringent US regulations, guaranteeing quality and safety.
  • Your satisfaction is our priority. should you encounter any quality concerns, reach out to us immediately for proactive assistance and resolution.
Select options This product has multiple variants. The options may be chosen on the product page

(1 Pack) Lidertik 1/2 inch CPVC Connect Pre-Assembled Ice Maker Outlet Box Valve 1/4 inch Recessed Refrigerator Water Line Wall Box with Shut Off Valve LI-ZBQH-540

Price range: $25.20 through $31.20

About this item

  • Easy-to-install the ice maker outlet box, designed specifically for ice maker.
  • Inlet:1/2 inch CPVC connect.
  • Outlet:1/4 inch compression connect with ice maker hose.
  • Rest assured, our product meets stringent US regulations, guaranteeing quality and safety.
  • Your satisfaction is our priority. should you encounter any quality concerns, reach out to us immediately for proactive assistance and resolution.
Select options This product has multiple variants. The options may be chosen on the product page

(1 Pack) Lidertik 1/2 inch Crimp PEX-B Pre-Assembled Ice Maker Outlet Box Valve 1/4 inch Recessed Refrigerator Water Line Wall Box with Shut Off Valve LI-ZBQH-520

Price range: $25.20 through $31.20

About this item

  • Easy-to-install the ice maker outlet box, designed specifically for ice maker.
  • Inlet: 1/2 inch Crimp PEX-B connect with 1/2 inch PEX A/B/C pipe.
  • Outlet:1/4 inch compression connect with ice maker hose.
  • Rest assured, our product meets stringent US regulations, guaranteeing quality and safety.
  • Your satisfaction is our priority. should you encounter any quality concerns, reach out to us immediately for proactive assistance and resolution.
Select options This product has multiple variants. The options may be chosen on the product page

(1 Pack) Lidertik 1/2 inch Crimp PEX-B Pre-Assembled Ice Maker Outlet Box Valve 1/4 inch Recessed Refrigerator Water Line Wall Box with Shut Off Valve LI-ZBQH-520

Price range: $25.20 through $31.20

About this item

  • Easy-to-install the ice maker outlet box, designed specifically for ice maker.
  • Inlet: 1/2 inch Crimp PEX-B connect with 1/2 inch PEX A/B/C pipe.
  • Outlet:1/4 inch compression connect with ice maker hose.
  • Rest assured, our product meets stringent US regulations, guaranteeing quality and safety.
  • Your satisfaction is our priority. should you encounter any quality concerns, reach out to us immediately for proactive assistance and resolution.
Select options This product has multiple variants. The options may be chosen on the product page

(1 Pack) Lidertik 1/2 inch Press Connect Pre-Assembled Ice Maker Outlet Box Valve 1/4 inch Recessed Refrigerator Water Line Wall Box with Shut Off Valve LI-ZBQH-560-LK

Price range: $23.70 through $31.20

About this item

  • Easy-to-install the ice maker outlet box, designed specifically for ice maker.
  • Inlet: 1/2 inch Press Connect connect with 1/2 inch copper/brass pipe.
  • Outlet:1/4 inch compression connect with ice maker hose.
  • Rest assured, our product meets stringent US regulations, guaranteeing quality and safety.
  • Your satisfaction is our priority. should you encounter any quality concerns, reach out to us immediately for proactive assistance and resolution.
Select options This product has multiple variants. The options may be chosen on the product page

(1 Pack) Lidertik 1/2 inch Press Connect Pre-Assembled Ice Maker Outlet Box Valve 1/4 inch Recessed Refrigerator Water Line Wall Box with Shut Off Valve LI-ZBQH-560-LK

Price range: $23.70 through $31.20

About this item

  • Easy-to-install the ice maker outlet box, designed specifically for ice maker.
  • Inlet: 1/2 inch Press Connect connect with 1/2 inch copper/brass pipe.
  • Outlet:1/4 inch compression connect with ice maker hose.
  • Rest assured, our product meets stringent US regulations, guaranteeing quality and safety.
  • Your satisfaction is our priority. should you encounter any quality concerns, reach out to us immediately for proactive assistance and resolution.
Select options This product has multiple variants. The options may be chosen on the product page

(1 Pack) Lidertik 1/2 inch Push-to-Connect Pre-Assembled Ice Maker Outlet Box Valve 1/4 inch Recessed Refrigerator Water Line Wall Box with Shut Off Valve LI-ZBQH-550-LK

Price range: $23.70 through $31.20

About this item

  • Easy-to-install the ice maker outlet box, designed specifically for ice maker.
  • Inlet:1/2 inch push-to-connect connect with 1/2 inch PEX/PVC/copper/brass pipe.
  • Outlet:1/4 inch compression connect with ice maker hose.
  • Rest assured, our product meets stringent US regulations, guaranteeing quality and safety.
  • Your satisfaction is our priority. should you encounter any quality concerns, reach out to us immediately for proactive assistance and resolution.
Select options This product has multiple variants. The options may be chosen on the product page

(1 Pack) Lidertik 1/2 inch Push-to-Connect Pre-Assembled Ice Maker Outlet Box Valve 1/4 inch Recessed Refrigerator Water Line Wall Box with Shut Off Valve LI-ZBQH-550-LK

Price range: $23.70 through $31.20

About this item

  • Easy-to-install the ice maker outlet box, designed specifically for ice maker.
  • Inlet:1/2 inch push-to-connect connect with 1/2 inch PEX/PVC/copper/brass pipe.
  • Outlet:1/4 inch compression connect with ice maker hose.
  • Rest assured, our product meets stringent US regulations, guaranteeing quality and safety.
  • Your satisfaction is our priority. should you encounter any quality concerns, reach out to us immediately for proactive assistance and resolution.
Select options This product has multiple variants. The options may be chosen on the product page

Electronics

7x Faster Tire Inflator Portable Air Compressor, 15000mAh & 150PSI PAC-1

$43.70
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

Jump Starter with Air Compressor, 12V 8000A Car Automotive Battery Jump

$98.37
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

Portable AC/DC Tire Inflator: Fast Inflation, Auto Shut-off & Memory Feature

$79.49
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

Digital Air Compressor for Car Auto Pump Portable Tire Inflator with LED Blue

$55.98
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

7x Faster Tire Inflator Portable Air Compressor, 15000mAh & 150PSI PAC-1

$43.70
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

Jump Starter with Air Compressor, 12V 8000A Car Automotive Battery Jump

$98.37
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

Portable AC/DC Tire Inflator: Fast Inflation, Auto Shut-off & Memory Feature

$79.49
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

Digital Air Compressor for Car Auto Pump Portable Tire Inflator with LED Blue

$55.98
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

7x Faster Tire Inflator Portable Air Compressor, 15000mAh & 150PSI PAC-1

$43.70
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

Jump Starter with Air Compressor, 12V 8000A Car Automotive Battery Jump

$98.37
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

Portable AC/DC Tire Inflator: Fast Inflation, Auto Shut-off & Memory Feature

$79.49
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

Digital Air Compressor for Car Auto Pump Portable Tire Inflator with LED Blue

$55.98
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

Veth VT-05 150 PSI Cordless & Corded Tire Inflator, Dual‑Screen LCD, LED, USB‑C

$44.99
Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is … Read moreabout the conditionNew:

Automotive – RAC610 12V Electric Tyre Inflator Air Compressor Car Pump with Pre

$42.87
Condition New Brand Does not apply Manufacturer Part Number Does not apply Item model number RAC610 Style Analogue Inflator Power

FURNITURE CATEGORIES

Musiclily Pro ST-DPHC Ceramic Rail Blade Single Coil Sized Humbucker Super Distortion Neck Middle Bridge Pickups Set for Strat Style Electric Guitar, Zebra Body Black Rail

Price range: $48.66 through $56.06

About this item

  • Fits Strat style electric guitar, neck/middle/bridge position
  • Single coil sized rail blade humbucker, featuring ceramic magnets, sounds clear and bright. Dual-resonance coils with twin-blade poles allows the best string coverage and clarity, brings outstanding hum-canceling performance. Neck and middle 9.2K medium output, more power is concentrated in the mids and low end for a bigger sound with more crunch; bridge 13.2K high output, designed to emulate the famous Super Distortion sound, great for distortion, hard rock or metal
  • Rail length: 60mm (2-23/64 inch), mounting screw holes distance: 76.5mm (3-1/64 inch)
  • Resistance(neck/middle/bridge): 9.2K/9.2K/13.2K, inductance(neck/middle/bridge): 4.9H/4.9H/9.0H. Tolerance: 0.5K for single coil, 1K for humbucker. The resistance value will change according to temperature and humidity. Usually, the resistance value will be high in hot and dry weather, be low in cold and wet weather. In extreme cases, the resistance value tolerance will be greater. Magnet: ceramic; PC bobbin; PCB baseplate, wiring: 4P Shield
  • Package includes: neck & middle & bridge pickups set and mounting accessories. Note: Our screws maybe will not fit your usage, please use your own if you can
Select options This product has multiple variants. The options may be chosen on the product page

PATIKIL 40+5uF 40/5MDF 370/440VAC Fan Start Capacitor, CBB65 Dual Circular Run Capacitor for Air Conditioner Cool Heat Pump Condenser Straight

Price range: $15.74 through $20.88

About this item

  • CBB65 capacitor is applied to starting and working of a single-phase motor in a 50Hz/60Hz AC electric power system.widely used for air conditioners, air compressors, motors, refrigerators, heat pump condensers, HVAC, generators, illuminating lamps, fans, etc
  • Specification:Model: CBB65;Material: Metallized Polypropylene, Aluminum Case;Lead End: 3 Terminal (12 pins);Rated Capacity: 40+5uF;Tolerance: ±5%;Rated Voltage: 370/440V AC;Rated Frequency: 50/60Hz;Climatic Category: -25/85/21;Overall Size: 50 x 110mm/1.95 x 4.29inch (D x H); Package Includes: 1 x CBB65 Capacitor
  • Advantage:This CBB65 run capacitor has characteristics of small volume, lightweight, low loss, strong overload ability, excellent electrical performance, reliable insulation performance, and current with good impact resistance.
  • Instruction:Capacitance is not divided into positive and negative stages and can be connected at will. High stability, good heat dissipation effect under high temperature.
  • NOTE: Please pay attention not to over current or over voltage when using
Select options This product has multiple variants. The options may be chosen on the product page

PATIKIL Brass Pipe Fitting, 3/8SAE 45° Flare Male x 1/4NPT Male Thread Brass Tube Fitting Pipe Connector with Nut for Tubing Adapter Hose Air Conditioner Refrigeration Gas Adapter

$15.66

About this item

  • Color: Brass; Material: Brass; Overall Length: 40 mm / 1.57 inch; Hex Width: 21 mm / 0.83 inch; Thread Size: 3/8 SAE Flare x 1/4 NPT; Package List: 1 Pcs x Brass Pipe Fitting
  • Advantage: Ours are made of premium thickened brass material, precision machining, standard specifications, high strength, pressure resistance, corrosion resistance, high and low temperature resistance, good sealing performance, not easy to disconnect, and strong and durable
  • Instruction: Easy to use, the hexagonal part is designed to be tightened with a wrench, and the included flare nut can be used for the flare joint at the end of the copper pipe
  • Application: This brass pipe fitting is widely used and is very suitable for connecting indoor and outdoor pipes, such as air conditioners, small split air conditioners, refrigeration refills, HVAC systems, heating and cooling, hydraulics, manifolds, vacuum pumps, pressure gauges, water tanks, as well as fuel, liquid, oil, gas, vacuum, aviation pipelines, etc
  • NOTE: Please check the size before choosing our product

IKAPE Coffee Maker Mat, Dish Drying Coffee Mats for Kitchen Counter for Coffee Bar Accessories Protects Kitchen Countertops From Spills, Stains & Scratches – Can be Machine Washable (15.8” x 23.6”)

$13.49
  • 💖 You Need a Tidy Desktop ☕: Are you tired of a dirty desktop? For those cleanliness fetishes, you can use our IKAPE coffee maker mats to keep a messy tabletop. It will be a practical kitchen accessory that you deserve to have. It always keeps the countertop clean and tidy and is one of the must-have accessories for your coffee bar.
  • 💖 Super Absorbent ☕: Made of absorbent nanomaterial, this coffee mat absorbs liquid stains from your coffee process, protecting your expensive kitchen table top from coffee stains, milk stains, and other dark stains.
  • 💖 Easy to Clean ☕: You can clean this coffee mat by hand or machine, dry, and reuse it, and the black pattern design makes it super stain resistant, which can be folded for storage and portability (Note, You can not bleach it).
  • 💖 Anti-Slip ☕: The rubberized flat surface on the bottom of the coffee maker mat has a good anti-slip effect. Place the coffee maker on a carpet the espresso mat will be firmly attached to the table. The waterproof bottom will prevent spills from contaminating your table and keep your coffee bar clean for a long time.
  • 💖 More Application ☕: IKAPE is a brand created by a group of excellent baristas devoted to providing quality accessories and tools to get the best espresso. You can always trust our professionalism. These coffee maker mats are widely used for any small household appliance in the house, such as mugs, air fryers, ovens, water dispensers, etc. We also provide a one-year after-sales service. When you are unsatisfied with your purchase, you can always contact us for a 100% refund.

Tailulu Official AP050 AP052 Air Purifier Replacement Filter, 3-in-1 Air Purifier Filter, True H13 HEPA Filter, 2Pack(Yellow)

$46.49

About this item

  • [AP050 Replacement Filter] Exclusively designed for Tailulu AP050 air purifier to maintain its peak performance. With cost-effective price to save much cost for your all-year-round air cleaning need. It is recommended to replace filters every 3-6 months depending on the usage and air quality.
  • [Superior Quality] Our AP050 replacement filter is made of premium non-woven fabric and charcoal, ensuring high-efficiency air cleaning performance and safe to use for your whole family.
  • [Better Air, Better Life] The replacement filter features 3 in 1 filtration System: Pre-filter, H13 true HEPA filter, and Charcoal filtration system work together to purify 99.97% of 0.3-micron particles from dust, pollen, pet dander, smoke, cooking smell, hair and odor. Effectively improve indoor air quality and create a healthy environment.
  • [Easy to Replace] Simple to replace the filter as the steps below: 1. Flip the air purifier upside down and rotate the bottom cover 2. Remove the cover and the used filter, and replace them with a new filter 3. Place the bottom cover back onto the machine and twist it clockwise until you hear it click in place 4. Press and hold for 3 seconds to reset the filter indicator.
  • [Buy with Confidence] Filter is sealed to protect their service life. Remove the plastic packaging before using the filter if you encounter any issues with your replacement filter or air purifier, you are welcome to contact us freely. We’re ready to help you anytime.

OdorStop Professional Grade Ozone Generators (900 Sq Ft + UV)

$224.99

About this item

  • 🛑 TREATMENT AREA OF 900 SQUARE FEET+: The OS900UV is perfect for deodorizing and sanitizing small to medium spaces such as hotel rooms, bedrooms, offices, cars, RV’s, and boats. It will eliminate odors caused by mold, bacteria, viruses, tobacco, smoke, animals, cooking, and more.
  • 🛑 PATENTED DESIGN AND TECHNOLOGY: The OS900/6G has a compact, high quality aluminum housing, is lightweight (6 lbs), has a 2-hour timer with a hold option, 1 high output ozone plate (400 mg/h), a replaceable filter (OSF912), an 80 CFM fan, a folding handle, and is equipped with UV for additional purifying power. It comes ready to use with no assembly required. Product measurements: 9 x 8 x 8 inches, 6lbs (Package dimensions listed above).
  • 🛑 TOP RATED FOR A REASON: OdorStop continues to set the standard in the ozone industry with innovative concepts and designs. With more than 15 models to choose from, we have a model for every odor and sanitizing need. OdorStop is trademarked and trusted!
  • 🛑 BUYER’S BEWARE: Many companies grossly exaggerate ozone output and treatment areas, knowing customers have no ability to verify their overstated claims. Also, some do not have a presence in the U.S., a stated warranty, or any customer service at all.
  • 🛑OdorStop is a U.S. company with a 24-hour customer service hotline and a website with instructional videos. We offer an industry leading 5-year warranty and a 30-day money back guarantee! Amazon Policy prohibits the sale of all ozone products to California. Ozone is for use in UNOCCUPIED spaces only. EPA Est. No. 94721-CHN-1

IKAPE 51mm Mantis WDT Distribution Tool, Espresso Distribution Tool for Baristas, Featuring 8-Needle Stirrer, Adjustable Needle Height, with Dosing Funnel and Stand, Walnut Handle

$66.74
  • Usage Precautions for Mantis WDT Distribution Tool: Avoid Excessive Pressure: Do not press down too hard, as this may cause the coffee powder in the portafilter to fly out.Limit Tamping Times: The ideal number of tamping actions is 2-3 times. Excessive tamping may result in the powder being pushed to the edges
  • Note 2: To avoid overflow, select a suitably sized powder bowl or use the correct amount of coffee powder. Stirring just 2-3 times is sufficient for thorough mixing
  • Effortless & Efficient Coffee Distribution: Our tool combines a press-and-rotate mechanism with an innovative auto-return feature, allowing for even, multi-trajectory distribution of coffee grounds with just one press. The upgraded bearings ensure a smooth and efficient operation, saving you time and effort
  • Customizable & Stable Design: The three-pillar ring structure provides horizontal stability during use, ensuring precise coffee distribution. Plus, the adjustable needle height allows you to customize the tool to fit different baskets, catering to your specific needs
  • Integrated Magnetic Base for Secure Attachment: The included magnetic powder ring securely attaches to the portafilter, preventing spills and maintaining a tidy workspace. The strong magnetic base with 8 pins further ensures the tool stays in place, preventing damage and making storage a breeze
  • Unique Needle Configuration for Even Dispersion: The 10 irregularly placed needles create a unique pattern of concentric circles, ensuring 360° even dispersion of coffee grounds. This innovative design maximizes extraction uniformity and enhances the quality of your espresso
  • Complete Package with Replacement Needles: Our tool comes with an additional set of 10 original 0.25mm needles, allowing you to easily replace any damaged ones. This ensures you always have a fully functional tool at hand, ready to deliver perfect espresso shots every time

MACKENZIE-CHILDS Electric Kettle, Stainless-Steel Tea Kettle, Blue-and-White Royal Check

$299.93

About this item

  • FANCY ELECTRIC TEA KETTLE: Our iconic hot water kettle is boiling and bubbling over with style. This colorful electric kettle is a functional and fun addition to your modern kitchen and a fast way to heat water for tea or coffee.
  • CUTE KITCHEN ESSENTIAL: The Royal Check electric stainless-steel kettle features a regal blue-and-white checkered pattern with color-dragged accents that mimic brushstrokes. It has an 8-cup capacitythat is perfect for tea parties and office breaks.
  • KITCHEN DECOR ACCESSORIES: At MacKenzie-Childs, we make everyday items extraordinary. From the countertop to the table, you can enjoy the magic of MacKenzie-Childs anywhere. Check out our tea kettle for stovetop use, stainless-steel water kettle, and more.
  • THE PERFECT GIFT: A MacKenzie-Childs piece is much more than a gift—it’s the beginning of a lifelong collection. Our decorative tea kettle makes an amazing Christmas, wedding, or housewarming gift. Welcome to the MacKenzie-Childs family!
  • MACKENZIE-CHILDS: MacKenzie-Childs was born of our love of home and our commitment to fresh, innovative design. Each piece holds the surprise and joy of the unexpected.
Select options This product has multiple variants. The options may be chosen on the product page